coveappliance.com
|
11
INSTALLATION
Troubleshooting
Dishwasher does not operate.
• Verify power is on.
• Verify electrical power to dishwasher and home circuit
breaker is on.
• Verify the child lock, Sabbath feature, and showroom
mode are not turned on.
WARNING
Follow all city and state laws when storing, recycling or
discarding unused dishwashers.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
Water Softener
WATER HARDNESS
For water softener models only, use the test strip provided
and the chart below to determine the appropriate water
hardness setting. Refer to the chart below to determine the
water hardness setting.
SETTING HARDNESS
0 (Default) 0–4 gpg
1 5–6 gpg
2 7–8 gpg
3 9–11 gpg
4 12–13 gpg
5 14–15 gpg
6 16–17 gpg
7 18–19 gpg
8 20–22 gpg
9 23–24 gpg
10 25+ gpg
Setting user options:
1 Touch CANCEL twice.
2 Touch and hold OPTIONS for approximately 3 seconds
until “User Set Up” appears on the display.
3 Touch OPTIONS multiple times to scroll to Water
Hardness.
4 Touch ENTER to scroll or to select the desired setting.
5 Touch CANCEL to exit user setup.
To Next Page
Loading...
Need help?
General