Sub-Zero IT30RRH Installation Guide

6 | Sub-Zero Customer Care 800.222.7820
SITE PREPARATION
Preparation
Uncrate the unit and inspect for damage. Remove the wood
base and discard shipping bolts and brackets. Remove and
recycle packing materials. Do not discard the kickplate, anti-
tip bracket and hardware.
Remove the kickplate by extracting the two mounting
screws. Refer to the illustration below.
Anti-Tip Bracket
WARNING
To prevent the unit from tipping forward, the anti-tip
bracket must be installed.
The back of the anti-tip bracket must be installed 24" (610)
from the front of the unit (without panels).
Use all anti-tip bracket hardware as instructed for wood or
concrete oors.
IMPORTANT NOTE: For wood or concrete oor applications,
if the #12 screws do not hit a wall stud or wall plate, use the
#8 screws and #12 washers with the wall anchors.
IMPORTANT NOTE: In some installations the subooring or
nished oor may necessitate angling the screws used to
fasten the anti-tip bracket to the back wall.
ANTI-TIP HARDWARE
1 Anti-tip bracket
12 #12 x 2
1
/2" pan head screws
4
3
/8"–16 x 3
3
/4" wedge anchors
12 #12 at washers
4 #8–18 x 1
1
/4" truss head screws
4 Nylon Zip-it
®
wall anchors
SCREW
Kickplate removal.

Sub-Zero IT30RRH Specifications

General

Type	built-in
Style	no freezer
Color	custom, custom panel ready
Number of Doors	3
Total Capacity	16.5 cubic feet
Refrigerator Capacity	16.5 cubic feet
Defrost System	automatic
Number of Refrigerator Shelves	3
Temperature Control	electronic
Interior Light	led
Dispenser	none
Ice Maker	no
Water Filter	no
Air Filter	yes
Door Alarm	yes
Smart Home	yes
Wi-Fi	wi-fi
Annual Energy Consumption	324 kilowatt hours
Voltage	115 volts
Current	15 amperes

Weight and Dimensions

Depth	24 inches
Height	84 inches
Width	30 inches
Net Weight	400 pounds