IMPREZA U.S.A. (E)
6
Interior equipment
6-15
– CONTINUED –
J To remove the cover housing
HG0190HG0099,
Match mark
1. Rewind the cover.
2. Pull either sleeve on the end of the cover housing to shorten its
length.
3. Take it off the retainer.
4. Store the cover housing in the luggage area.
J To install the cover housing
1. Pull either sleeve on the end of the cover housing to shorten the cov-
er’s length.
2. Insert the projections located on the both ends of the sleeve into the
recesses of the retainers.
To Next Page
Loading...
Need help?
General
