IMPREZA U.S.A. (E)
10-58
J Front turn signal light
HG0194
1. Remove the front turn signal light assembly mounting screws using
the phillips screwdriver.
2. Remove the lens from the front turn signal light assembly.
3. Remove the bulb from the socket by pushing it in and turning counter-
clockwise. Install a new bulb.
4. Reinstall the lens to the front turn signal light assembly and tighten the
mounting screws.
J Side turn signal light
OM-H0246
1. Pull the left side of the turn signal light assembly while moving it for-
ward in relation to the vehicle.
2. Remove the bulb holder from the side turn signal light assembly by
To Next Page
