IMPREZA U.S.A. (E)
10
Maintenance and service
10-61
– CONTINUED –
terclockwise. Install a new bulb.
4. Set the bulb holder into the rear combination light assembly and
turn it clockwise until it locks.
5. Close the cover and latch the lock.
J License plate light
HG0198
1. Remove the mounting screws using a phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.
J Interior light, spot light
OM-H0251OM-H0250
To Next Page
Loading...
Need help?
General
