BAJA U.S.A..A2310BE–A
6
Interior and exterior equipments
6-21
– CONTINUED –
Bed cover (if equipped)
The bed cover is designed to cover the cargo area of the bed. The bed
cover is water resistant, but not waterproof.
CAUTION
D Do not place cargo on top of the bed cover.
D Do not use the hard bed cover section as a step.
D Do not use the bed cover to secure cargo.
D To avoid damage, clean the bed cover with only soap, water
and a soft brush.
D Remove the soft portion of the bed cover before taking the ve-
hicle through a car wash.
B Securing the cover
HB6034BAHB6033AA
To secure the soft portion of the bed cover to the bed, simply start
from either side of the vehicle and place the plastic strip under the
rail. Slide your hand down the side of the vehicle pushing the plastic
strip under the rail as you go. Continue this around the entire length of
the bed. Fasten both closeout wraps with Velcro around the rear
chrome bars so that they are secure. Your cover should be tight and
ready to conceal items in the bed from view.
To Next Page
Loading...
