Subaru 2003 Baja - Tail Light (on the Tailgate)

BAJA U.S.A..A2310BE–A
11
Maintenance and service
11-59
– CONTINUED –
9. Install the cover by inserting the knobs into the places.
J Tail light (on the tailgate)
HBB087BA
HBB086BA
1. Open the tailgate.
2. Remove the tailgate trim by loosening the installation screws.
3. Remove the tail light cover by loosening the installation screws.
HBB048BA
HBB088BA
4. Remove the bulb socket from the tail light by turning it counterclock-
wise.
5. Remove the bulb from the socket by pulling it.
6. Install a new bulb into the socket by pushing it.
7. Install the bulb socket into the tail light by turning it clockwise until it
stops.
8. Install the tail light cover and the tailgate trim.