Subaru 2003 Baja - Page 368

BAJA U.S.A..A2310BE–A
11-58
HBB084BA
HBB083BA
1. Open the tailgate.
2. Pry the cover from the side of the rear combination light.
3. Remove the rear combination light mounting bolts. Then, slide the
rear combination light assembly to the rear and remove it from the
vehicle.
HBB085BB
4. Remove the bulb socket from the rear combination light assembly by
turning it counterclockwise.
5. Remove the bulb from the socket by pulling it.
6. Install a new bulb into the socket by pushing it.
7. Set the bulb socket into the rear combination light assembly and turn
it clockwise until it stops.
8. Mount the rear combination light assembly into the vehicle body with
two mounting bolts.