BAJA U.S.A..A2310BE–A
6-30
HB3019AA
The sport activity lights mount to the vehicle front cross bar. The sport
activity lights cross bar wire harness connects to the roof wire harness
and then to the vehicle’s electrical system.
A tool is provided which will enable the sport activity lights’ positioning to
be modified, so that each lamp can be aimed or rotated. The lamps can
be mounted in two positions, upright (normal) or forward (downward).
The lamps should be rotated to the forward (downward) position when
washing your vehicle.
If you choose to remove sport activity lights, the following sequence
should be utilized:
1. Disconnect the roof harness from the cross bar harness connector.
2. Attach the water proof connector cap to the roof harness connector.
3. Care should be used when removing or installing this electrical prod-
uct.
To Next Page
Loading...
