11-16
Maintenance and service
ing.
1) Air cleaner case cover
2) Viscous air cleaner element
Dry air cleaner element (if required)
3. Open the air cleaner case cover and
remove the air cleaner element.
4. Clean the inside of the air cleaner cov-
er and case with a damp cloth and install
a new air cleaner element.
5. To install the air cleaner case cover, in-
sert the three projections on the air clean-
er case into the slits on the air cleaner
case cover and then snap the two clamps
on the air cleaner case cover.
T Turbo models
1. Unsnap the two clamps holding the air
cleaner case cover.
2. Open the air cleaner case cover and
remove the air cleaner element.
1
2
B00363
B00364
B00024
B00025
A8110BE.book 16 ページ ２００６年６月２３日 金曜日 午後１時３２分
To Next Page
