Subaru 2015 Forester - Cruise Control (if Equipped)

7
FORESTER
Cruise control (if equipped)
Q
Cruise control enables you to maintain a constant vehicle speed without
holding your foot on the accelerator pedal and it is operative when the
vehicle speed is 40 km/h (25 mph) or more.
1
To activate:
Press the cruise control main button.
2
To set speed:
Press the
RES/SET
switch to the
SET
side at desired speed
and release it.
3
To increase the speed:
- Press the
RES/SET
switch to the
RES
side and hold it, and then release at
desired speed.
- Depress accelerator pedal, and press the
RES/SET
switch to the
SET
side
at desired speed.
- For incremental acceleration, press the
RES/SET
switch to the
RES
side
quickly. *Each tap = plus 1 km/h (0.6 mph)
4
To decrease the speed:
- Press the
RES/SET
switch to the
SET
side and hold it, and then release at
desired speed.
- Depress brake pedal, and press the
RES/SET
switch to the
SET
side
at desired speed.
- For incremental deceleration, press the
RES/SET
switch to the
SET
side quickly. *Each tap = minus 1 km/h (0.6 mph)
5
To temporarily cancel:
- Press the
CANCEL
button.
- Depress brake pedal or the clutch pedal (MT).
- Press the X-mode switch to activate the X-mode (models with
X-mode).
To return to preset speed after it has been canceled, press the
RES
/
SET
switch to the
RES
side.
6
To deactivate:
Push the cruise control main button. Cruise control is
always deactivated when ignition switch is turned to
ACC
or
LOCK
/
OFF
.
2
1
5
3
4
6
Cruise control set indicator
Cruise control indicator
The cruise control main
button is pressed to activate
the cruise control function.
The vehicle speed has
been set to use the
cruise control function.
For models with the EyeSight
TM
system: Refer to the Owner’s Manual supplement for the EyeSight system.