3-90
Instruments and controls/Multi function display
& Initialize
Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the “
” or “ ”
switch as follows.
! Preparation for initialization
1. Turn the ignition switch to the “ON”
position.
2. Push and hold the
button to show
the selection screen.
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Initialize” item. Then, push the
button.
! Reset to factory default settings
1. Perform the preparation steps accord-
ing to “Preparation for initialization” F3-
90.
2. Operate the “ ” or “ ” switch to
select the “Reset to Defaults” item. Then
push the
button.
3. The system will prompt a Yes/No
dialogue (“No” is selected first). To return
to the factory default settings, select “Yes”
by operating the “
” switch.
4. Confirm the setting by pushing the
button.
5. The system will notify you that the
setting is complete.
To Next Page
Loading...
Need help?
General
