Subaru BRZ - Vehicle Controls; Lighting Controls

10
Controls
Light Controls
AUTO: The vehicle’s lights are
automatically on or off depending
on the level of the outside light.
Turns on headlights,
instrument panel
illumination, parking
lights, tail lights and
license plate lights.
Push up for right
turn signal.
Turns on instrument panel
lights, tail lights, parking lights
and license plate lights.
Push down for
left turn signal.
Illumination
Brightness
Control
While the light switch
is on, rotate the dial
downward to dim
the instrument panel
illumination. Rotate the
dial upward to make
the illumination
brighter. When the
dial is fully rotated
upward, the instrument
panel illumination
becomes full bright.
Headlight Beam
Leveler
High-IntensityDischarge(HID)
headlights generate more light
than conventional halogen
headlights. Therefore, a driver
of an oncoming vehicle may
experience too much glare
when your headlight beam
height adjustment is high
because the vehicle is carrying
a heavy load. The headlight
beam leveler can be used to
adjust beam height to avoid
such a condition. To lower the
beam, turn the knob to the
higher numbers.
Turns on
fog lights
(ifequipped).
1145810_13a_Subaru_BRZ_QRG_030812.indd 10 3/8/12 2:07 PM