Subaru BRZ - Automatic Climate Control Operation

14
Controls
Automatic Climate Control
(if equipped)
1. Automatic On and Off
This system automatically controls
outlet air temperature, fan speed, air
ow distribution, air inlet control, and air
conditioner compressor operation. Press
“AUTO”toactivate.Push“OFF”toturnoff
the system.
2. Temperature Control Dials
Rotate the dial to select a temperature
and maintain a comfortable climate within
the driver and passenger compartment.
Temperature is displayed digitally on the
screen. Separate temperature settings
can be adjusted for the driver’s side and
passenger’s side.
Operation in Manual Mode
3. Recirculated/Outside Air Switch
Push the air inlet selection button to
prevent outside air from being drawn into
the passenger compartment. Push the
button again to allow outside air into the
compartment.TOPREVENTWINDSHIELD
FOGGING,DONOTREMAININTHE
RECIRCULATED MODE FOR AN
EXTENDED PERIOD OF TIME.
4. Fan Speed Control Dial
On the automatic setting, the system
determines the fan speed to achieve
1
2
3
4
5
61
1145810_13a_Subaru_BRZ_QRG_030812.indd 14 3/8/12 2:08 PM