Subaru BRZ - Cruise Control Operation

19
Getting
Started
Instrument
Panel
Gauges
Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
19
Getting Getting
StartedStarted
Instrument Instrument
PanelPanel
GaugesGauges
PersonalizePersonalize
ControlsControls
While While
OperatingOperating
Safety/In Case Safety/In Case
of Emergencyof Emergency
Additional Additional
InformationInformation
Controls
Cruise Control
Increase speed
Pushtheleveruptothe“RES”
side; hold until your vehicle reaches
the desired speed and release. To
increase speed using the accelerator
pedal, press the pedal until you
reach the desired speed. Push the
leverdowntothe“SET”sidetoset
the speed.
Decrease speed
Pushtheleverdowntothe“SET”
side; hold until your vehicle slows to
the desired speed and release. To
decrease the speed using the brake
pedal, press the pedal to release
cruise control temporarily. When
the speed decreases to the desired
speed, push the lever down to the
“SET”sidetosetthespeed.
•Tocancelthecruisecontrol,pullthelever
toward you, push the brake pedal or press
the“ON-OFF”button.Ifyouhaveamanual
transmission, you can push in the clutch
pedal.
•Presstheacceleratorpedaluntil
your vehicle reaches the desired
speed. Push the lever down to the
“SET”sideandrelease.Easeoff
the accelerator pedal. Your vehicle
will maintain the desired speed.
•Toactivatethecruisecontrol,
pressthe“ON-OFF”button.The
cruise control indicator light on the
instrument panel will turn on. To
deactivate cruise control, press
the“ON-OFF”buttonagain.
•Toresumeyourspeedafter
canceling, push the lever up
tothe“RES”side.
1145810_13a_Subaru_BRZ_QRG_030812.indd 19 3/8/12 2:08 PM