Subaru E101SFL100 User Manual

ALCOHOL
WIPE
2. Rear Side Sill Plate (2)
1. Front Side Sill Plate (2)
3. Squeegee
4. Front Sill PlateTemplates 5. Rear Sill PlateTemplates 6. Alcohol Wipes (4)
Denotes instructional steps
necessary to complete the
process.
Denotes quality processes to be
checked prior to moving to the next
step.
Denotes safety equipment required to be used
such as a mask, goggles, rubber gloves, and
hearing protection.
Denotes cautions to be taken to avoid
physical injury or electronic component
damage.
Denotes warnings that may lead to
serious physical injury or vehicle
damage.
Denotes specific tools that are
necessary to complete the step.
Denotes cautions to be taken to avoid
vehicle and component damage.
GogglesMask
Rubber Gloves
Hearing Protection
SUBARU OF AMERICA
PAGE
1/10
DATE
02/10/17
ISSUE
00
INSTALLATION INSTRUCTIONS
PART NUMBER: E101SFL100
DESCRIPTION:
Crosstrek Sill Plates
KIT CONTENTS:
TOOLS REQUIRED:
MEANING OF CHARACTERS:
DESCRIPTION
Side Sill Plate Plate
Soft lint-free
Microfiber Cloth
Masking Tape Scissors
1. Front Side Sill Plate (2).
2. Rear Side Sill Plate (2).
3. Squeegee
4. Front Sill Plate Templates
5. Rear Sill Plate Templates
6. Alcohol wipes (4).
ALCOHOL
WIPE
LOCATE SIDE OF SILL PLATE HERE
LOCATE SIDE OF SILL PLATE HERE
LOCATE SIDE OF SILL PLATE HERE
LOCATE SIDE OF SILL PLATE HERE
(THIS SIDE UP FOR LEFT HAND)
(THIS SIDE UP FOR RIGHT HAND)
INSTALL TEMPLATE - FRONT EDGE
(THIS SIDE UP FOR LEFT HAND)
INSTALL TEMPLATE - REAR EDGE
(THIS SIDE UP FOR RIGHT HAND)
REAR OF VEHICLE
REAR OF VEHICLE
FRONT OF VEHICLE
FRONT OF VEHICLE
ALIGN TO VEHICLE EDGE
ALIGN TO VEHICLE EDGE
ALIGN TO VEHICLE EDGE
ALIGN TO VEHICLE EDGE
ALIGN TO SEAM IN INTERIOR TRIM
ALIGN TO SEAM IN INTERIOR TRIM
FRONT DOOR SILL
FRONT DOOR SILL
LOCATE SIDE OF SILL PLATE HERE
LOCATE SIDE OF SILL PLATE HERE
(THIS SIDE UP FOR LEFT HAND)
INSTALL TEMPLATE - REAR EDGE
(THIS SIDE UP FOR RIGHT HAND)
REAR OF VEHICLE
REAR OF VEHICLE
(THIS SIDE UP FOR LEFT HAND)
(THIS SIDE UP FOR RIGHT HAND)
FRONT OF VEHICLE
FRONT OF VEHICLE
ALIGN TO VEHICLE EDGE
ALIGN TO VEHICLE EDGE
ALIGN TO VEHICLE EDGE
ALIGN TO VEHICLE EDGE
INSTALL TEMPLATE - FRONT EDGE
LOCATE SIDE OF SILL PLATE HERE
LOCATE SIDE OF SILL PLATE HERE
ALIGN TO SEAM IN INTERIOR TRIM
ALIGN TO SEAM IN INTERIOR TRIM
REAR DOOR SILL
REAR DOOR SILL

Subaru E101SFL100 Specifications

General

Brand	Subaru
Model	E101SFL100
Category	Automobile Accessories
Language	English

Summary

Installation Preparation and Tools

Kit Contents

Lists all components included in the kit for installation.

Tools Required

Lists necessary tools for performing the installation.

Safety and Instruction Symbols

Warning and Caution Symbols

Symbols indicating potential injury, damage, or necessary precautions.

Instructional and Tool Symbols

Symbols denoting quality checks, safety gear, specific tools, and steps.

Preparation and Alignment Steps

Vehicle Washing and Cleaning

Thoroughly wash vehicle and clean sill areas with alcohol wipes.

Template Dry Fit and Positioning

Use templates and tape to position sill plates correctly on the vehicle.

Sill Plate Liner Separation

Remove liner from sill plate, avoiding contact with adhesive surface.

Sill Plate Alignment

Align sill plate edge with template and plastic panel before placement.

Adhering Sill Plates to Surface

Applying Front Sill Plate

Use squeegee with firm, overlapping strokes to adhere the front sill plate.

Separating Rear Sill Plate Liner

Remove liner from the rear sill plate, handling by edges.

Aligning and Applying Rear Sill Plate

Align rear sill plate with template and adhere using squeegee strokes.

Care and Maintenance

Cleaning Instructions

Wash side sill plates with warm soapy water as needed.

Visual Adhesion Check

Ensure all edges of the sill plates are firmly adhered.