Subaru EX40 - (9) SETTING THE TIMING CHAIN; (10) MOUNTING THE CAMSHAFT ON THE CYLINDER HEAD

- 32 -
(10) MOUNTING THE CAMSHAFT ON THE CYLINDER HEAD
Mount the camshaft on the cylinder head by inserting the pin (camshaft) through the head.
Fixthebolttopreventthepin(camshaft)fromcomingout.
Fig.5-44
TENSIONER
SPRING
(TENSIONER)
CHAIN
PIN
(TENSIONER)
PIN
(CAMSHAFT)
CAMSHAFT
M6 x 12 BOLT : 1 pc.
Bolt used to prevent the
pin (camshaft) from coming out
CHAIN
CHAIN
CAMSHAFT
PIN (CAMSHAFT)
M6 x 12 BOLT : 1 pc.
Bolt used to prevent the
pin (camshaft) from coming out
Fig.5-43
(9) SETTING THE TIMING CHAIN
 (a)Alignthetimingmarkonthecrankshaftsprocketwiththemarkplateofthetimingchain.

(b)Alignthetimingmarkonthecrankshaftsprocketwiththemarkplateoftheoppositeendofthetimingchain.
MARK PLATE
TIMING MARK
CHAIN GUIDE FITTING POSITION
CAMSHAFT SPROCKET
CRANKSHAFT SPROCKET
ROLL PIN
TIMING MARK
MARK PLATE
The mark plate does not
have a camshaft side or
crankshaft sprocket side.
Number of oval steel link : 112