Troubleshooting
101
Cruise control is canceled automatically.
Did you perform one of the following operations?
• Manually depressing the brake pedal
• Pressing the (CRUISE) switch
- If the (CRUISE) switch is pressed while the cruise control is set,
the cruise control will be canceled.
• Staying on a steep slope
• Turning the steering wheel sharply
• Operating the paddle shift lever
• Shifting the select lever to the position
• Unfastening the seatbelt.
• Parking brake is applied.
• Is the vehicle on a steep slope?
• Pressing the X-mode switch (the X-mode indicator light illuminate)
• The system may also be canceled under conditions not listed above.
⇒ Refer to page 51 (Adaptive Cruise Control)
⇒ Refer to page 85 (Conventional Cruise Control)
Has the EyeSight system temporarily stopped?
*When the Adaptive Cruise Control function is in use.
A noise occurs when automatic braking control activates.
This is the sound of the automatic braking control operating - there are some
mechanical components to the system, and they do occasionally make audible
sounds during automatic braking control. This sound is not a malfunction.
Braking control activates frequently when driving with Adaptive Cruise Control in
heavy traffic.
When Adaptive Cruise Control is activated, the EyeSight system performs control
based on the movement of vehicles or objects in front. As a result, acceleration
and deceleration may be more frequent while the system adjusts to vehicles or
objects the camera system is detecting. If it is difficult to maintain a consistent fol-
lowing distance under certain conditions (such as in heavy traffic, poor weather or
urban environments, etc.), do not use Adaptive Cruise Control.
M
B8232BE-A.book 101 ページ ２０１７年３月９日 木曜日 午前１１時４分
To Next Page