About EyeSight
12
■ Lead Vehicle Start Alert
This function notifies the driver when the vehicle stopped in front starts moving but the
driver’s vehicle remains stationary.
⇒ Refer to page 76.
■ Conventional Cruise Control
In this mode, the system maintains a constant vehicle speed. It does not follow the vehicle
in front. This function can be used even when the stereo camera has temporarily stopped
operating. (
⇒ Refer to page 91.) (This function is used by switching from Adaptive Cruise
Control to Conventional Cruise Control.)
⇒ Refer to page 77.
NOTE
EyeSight does not operate when the engine is not running.
B8232BE-A.book 12 ページ ２０１７年３月９日 木曜日 午前１１時４分
To Next Page