About EyeSight
15
■ Set vehicle speed display
Displays the set vehicle speed.
⇒ Refer to pages 42 and 79.
■ Lane Keep Assist indicator
• This indicator illuminates when Lane Keep Assist is turned on by pressing the (Lane
Keep Assist) switch.
• While the Lane Keep Assist system is activated, if the vehicle travels across a lane
marker, the indicator turns from white to green.
⇒ Refer to pages 56 and 60.
■ Select lever/gear position indicator
• This indicator illuminates and shows which position the select lever or the gear is in.
■ EyeSight warning indicator (yellow)
• This indicator illuminates or flashes when a malfunction occurs in the EyeSight system.
• When it is illuminated or flashing, none of the EyeSight functions can be used (including
Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
⇒ Refer to page 90.
■ EyeSight temporary stop indicator (white)
• This indicator illuminates when the EyeSight system is temporarily stopped.
• When the ignition switch is placed in the ON position, it will illuminate if the
(CRUISE) switch or (Lane Keep Assist) switch is set to ON within approximately 7
seconds of the engine starting. It turns off when approximately 7 seconds have elapsed
since the engine started.
• When it is illuminated, none of the EyeSight functions can be used except for Conven-
tional Cruise Control.
⇒ Refer to page 91.
■ Lane Departure Warning OFF indicator light
• This indicator illuminates when the Lane Departure Warning and Lane Sway Warning are
off.
• It also illuminates when the ignition switch is turned to the ON position, and then approxi-
mately 7 seconds after the engine starts, the Lane Departure Warning will be turned off or
remain illuminated depending on the current status (ON or OFF).
⇒ Refer to page 72.
B8232BE-A.book 15 ページ ２０１７年３月９日 木曜日 午前１１時４分
To Next Page
Loading...
