EasyManua.ls Logo

Subaru Forester 2018 - Canceling Lane Keep Assist Features

Subaru Forester 2018
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lane Keep Assist
62
Canceling Lane Departure Prevention Function
Cancellation by the operation of a driver (In case no beep sounds)
The following operation cancels Lane Departure Prevention Function.
If the function is canceled, “ ” (Lane Keep Assist indicator) and the lane indicator are
turned off on the EyeSight display area.
Press the (Lane Keep Assist) switch.
Either of the following operations temporarily cancels the Lane Departure Prevention Func-
tion.
While temporarily canceling the function, ” (Lane Keep Assist indicator) on the
EyeSight display area illuminates in white and the lane indicator is turned off.
Depressing the brake pedal
Operating the turn signal lever
When the system determines that the driver operates the steering wheel to make a lane
change.
Turning on the hazard warning flasher switch
Automatic cancellation by the system (An audible beep will sound.)
Under the following conditions, a beep sounds and the Lane Departure Prevention Function
is temporarily canceled.
While the function is temporarily canceled, “ ” (Lane Keep Assist indicator) on the
EyeSight display area illuminates in white and the lane indicator is turned off.
When the system cannot detect the lane.
The windshield wiper operates at a high speed.
The vehicle speed is less than approximately 34 MPH (55 km/h) or is more than
approximately 93 MPH (150 km/h).
The Vehicle Dynamics Control or the Traction Control Function is activated.
Either the driver’s door, the front passenger’s door or the rear door is open.
The seatbelt of driver’s seat is unfastened.
The parking brake is applied.
The select lever is shifted to a position other than the or position.
The system could not detect the steering operation by the driver for a certain period of
time.
- When the system detected no steering
operation, the interruption screen
appears on the combination meter dis-
play. The interruption screen continues to
appear until the system detects the steer-
ing operation. If the system still cannot
detect the steering operation, the Lane
Departure Prevention Function is auto-
matically canceled.
When entering a sharp curve.
When driving on a sharp curve.
D M
A
D
miles
MPH
Keep Hands On
Steering Wheel
E
F
S02224
B8232BE-A.book 62 ージ 017年3月9日 木曜日 午前11時4

Related product manuals