Pre-Collision Throttle Management
69
Press and hold the Pre-Collision Braking System OFF switch for approximately 2 seconds
or longer to turn off the Pre-Collision Throttle Management System. When 1 short beep
sound emits, this function is turned off and the Pre-Collision Braking System OFF indicator
light on the instrument panel illuminates.
To turn the system back on, press and hold the Pre-Collision Braking System OFF switch
again for approximately 2 seconds or longer. When this function is turned on, the Pre-Colli-
sion Braking System OFF indicator light turns off.
⇒ Refer to page 35.
Turning off Pre-Collision Throttle Management
NOTE
• When Pre-Collision Throttle Management is turned off, the Pre-Collision
Braking System also turns off.
• Even when Pre-Collision Throttle Management is turned off, if the ignition
switch is turned off and the engine is restarted, Pre-Collision Throttle
Management will be turned on. The default setting for Pre-Collision
Throttle Management when the vehicle is restarted is “ON”.
S02020
S02143
B8232BE-A.book 69 ページ ２０１７年３月９日 木曜日 午前１１時４分
To Next Page
Loading...
