Subaru Forester 2018 - Turning Off Lane Departure Warning

Lane Departure Warning
72
Press and hold the Lane Departure Warning OFF switch for approximately 2 seconds or
longer to turn off the Lane Departure Warning. When 1 short beep sound emits, this function
is turned off and the Lane Departure Warning OFF indicator light on the instrument panel
will illuminate.
To turn the function back on, press and hold the Lane Departure Warning OFF switch again
for approximately 2 seconds or longer. When the function is turned on, the Lane Departure
Warning OFF indicator light turns off.
■ Lane Departure Warning OFF indicator light
This indicator illuminates when the ignition
switch is turned to the ON position.
Approximately 7 seconds after the engine
starts, the Lane Departure Warning OFF
indicator light turns off or remains illuminated,
depending on the current status of the Lane
Departure Warning function (ON or OFF). It
turns on when the Lane Departure Warning is
turned off.
It also illuminates under the following
conditions.
• When the EyeSight system has a
malfunction
⇒ Refer to page 90.
• When the EyeSight system has stopped temporarily
⇒ Refer to page 91.
Turning off Lane Departure Warning
NOTE
• When the Lane Departure Warning is turned off, the Lane Sway Warning is
also turned off.
• The ON/OFF status of the Lane Departure Warning is restored when you
restart the engine.
S02021
S02144
B8232BE-A.book 72 ページ ２０１７年３月９日 木曜日 午前１１時４分