CONNECTING MANUALLY
When the auto connection has failed, it is necessary to connect
Bluetooth phones/devices manually.
Follow the “CONNECTING OR DISCONNECTING Bluetooth
PHONE/DEVICE”. (→P.79)
RECONNECTING THE Bluetooth PHONE/DEVICE
If a Bluetooth phone/device is disconnected due to poor
reception from the Bluetooth network when theignition switch
is turned to the “ACC” or “ON” position, the system automatically
reconnects the Bluetooth phone/device.
● If a Bluetooth phone/devic
e is disconnected on purpose,
such as turning it o, this does not happen. Reconnect
the Bluetooth phone/device manually.
DELETING Bluetooth PHONES/DEVICES
1.
Display the phone settings screen. (→P.77)
2.
Select
(Manage Devices).
3.
→
(Delete)
4.
Select for the Bluetooth phone/device you wish to
delete.
5.
Select
(OK) when the conrmation message appears.
l The Bluetooth phone/device will still contain information from
this system even after the Bluetooth phone/device has been
deleted. Operate the Bluetooth phone/device to delete the system
information saved inside the Bluetooth phone/device.
Settings
81
Settings
GB8_US.indb 81 2020/10/09 7:22:32
To Next Page
Loading...
