SUBURBANWATERHEATERS
I.
Suburban Manufacturing presents this Service Education Program to better assist technicians in
understanding our water heaters.
Our portion of this program will be approximately four hours, in which time we will discuss four major
areas: 1) Model
NumberIGeneral Operating Instructions, 2) Water Heater Overall Construction, 3) Gas
and Electric Units. 4) Direct Spark Ignition Units.
Also discussed will be:
1) VoltageIGas Pressure
2) Gas Leaks
3)
PilotIBurner Adjustments
4)
Warranty
5) Basic Troubleshooting
6) Helpful Service Hints
If you have any additional questions, feel free to ask.
Each section will begin with
a
series of questions that will be answered and should provide you with the
ability to make a quick and accurate diagnosis and repair.
A. Distribution Centers:
Suburban Manufacturing Company
676 Broadway Street
Dayton, TN 37321
Phone: 423-775-21 31
Fax: 423-775-701 5
Suburban Manufacturing Company
5571 2 County Road 15 South
Elkhart, IN 4651 6
Phone: 21 9-294-561 8
Fax: 21 9-293-1 685
In Canada:
G.L. Products Limited
1030
-
8th Line
Post Office Box 760
Oakville, Ontario
CANADA L6J 5C4
Phone: 41 6-845-7558
Fax: 41
6-845-7875
Greg Lund Products Ltd.
4025
-
9th Street SE
Calgary, Alberta
CANADA T2H 2G7
Phone: 905-243-2792
B.
Necessary tools and equipment to service Suburban Pilot and DSI Water Heaters:
Manometers or U-Tube
Millivolt Tester
Voltmeter
Circuit Board
Tester-#Sf30
Gas Thermostat Wrench
Nut Drivers
Open End Wrench
Phillips Screwdriver
Flat Head Screwdriver
LP Leak Test Liquid
Pliers
C.
Model Numbers Listing