To Next PageTo Next Page
Need help?Do you have a question about the Sullair 02250165-411 R01 and is the answer not in the manual?
General| Brand | Sullair |
|---|---|
| Model | 02250165-411 R01 |
| Category | Controller |
| Language | English |
General safety advice for compressor use and maintenance.
Requirements and recommendations for PPE when operating the compressor.
Procedures for safe pressure release and hose connection safety.
Safety precautions related to fire and explosion hazards.
Warnings about keeping clear of moving components like fans and couplings.
Safety advice on avoiding contact with hot surfaces and sharp edges.
Precautions for handling toxic and irritating substances used in the system.
Safety procedures for electrical shock prevention during maintenance.
Guidelines for safely lifting and handling the compressor unit.
Safety measures to prevent entrapment within the compressor enclosure.
Overview of the WS Controller's role in compressor operation and protection.
Description of the WS Controller's touch pads, display, and indicator lights.
Steps for checking motor/fan rotation and initial compressor start-up.
Procedure for safely shutting down the compressor using the STOP pad.
Introduction to modifying compressor parameters using the WS Controller.
Steps for accessing and changing parameter values on the WS Controller display.
Descriptions of adjustable parameters like Unload Pressure, Load Delta, etc.
Procedure for recalibrating the P2 pressure transducer using WSPC software.
Configuration for enabling external remote control of compressor operation.
Overview of WS Controller components, functions, and display messages.
Detailed description of each touch pad and its function on the controller panel.
Explanation of the Power On, Run Mode, Maintenance, and Fault indicator LEDs.
Explanation of the Normal View, Compressor Status, and Adjustment Views on the display screen.
Explanation of different operating modes like Automatic, Manual, Off, Fault, and UI COMM.
Descriptions of various states the compressor can be in during operation.
Explanation of service reminders that appear on the display, like filter changes.
Explanation of warning messages, their causes, and potential actions.
Explanation of fault messages, their causes, and troubleshooting steps.
Guide to diagnosing and resolving compressor problems using the troubleshooting section.
Table listing symptoms, probable causes, and remedies for common issues.
Table detailing specific faults and warnings for the WS Controller with limits.
How the controller behaves after a power interruption based on prior state.
Information about the controller's internal battery and its function.
Part numbers and diagrams for replacement connector plugs for the controller.
Special safety instructions and warnings specific to VSD packages.
Guidelines for installing the variable speed AC drive and ensuring proper wiring.
Flow diagram explaining WS Controller display messages for VSD machines.
Explanation of VSD status messages like temperature and capacity.
Description of VSD-specific adjustable parameters, like VSD Setpoint Pressure.
Steps for the initial installation and startup of a new VSD compressor package.
Table of VSD drive faults, possible causes, and solutions.
