Need help?Do you have a question about the Sullair SUPERVISOR II Series and is the answer not in the manual?
General| Brand | Sullair |
|---|---|
| Model | SUPERVISOR II Series |
| Category | Controller |
| Language | English |
Details features related to Supervisor II communication and protocol.
Explains the benefits of the broadcast mode for machine communication.
Defines the structure and components of communication messages.
Specifies how pressure signals from machines are connected.
Describes how the full load feature operates on machines.
Explains the general principle of efficient compressor usage in sequencing.
Outlines different operational modes for compressor sequencing control.
Describes the keypad function to enable/disable sequencing modes.
Details the inputs and outputs for remote control of sequencing.
Configuration for VSD machines as trim machines in a system.
Configuration for non-rotating fixed-speed machines in a VSD system.
Configuration for rotating fixed-speed machines in a VSD system.
Explains timers for managing machine start/load/unload timing.
Demonstrates unload operation using the recovery timer.
Demonstrates load operation using the recovery timer.
Shows machine starting when pressure drops below lowest setting.
Explains delay start timer when pressure is between settings.
Provides a concise overview of pressure settings and timer actions.
To Next Page
