Sullair SUPERVISOR II Series User Manual

TABLE OF CONTENTS
Section 1 PAGE
SUPERVISOR
PROTOCOL
1 SECTION 1.1 SUPERVISOR II PROTOCOL
VER 3.0
2 BROADCAST MODE OFFERS SEVERAL
ADVANTAGES:
2 MESSAGE FORMAT
3 MESSAGE TYPES
3 RUN STATUS (r)
3 MODE (m)
6 ANALOG SHUTDOWN TABLE
6 RS-485 SERIAL CHANNEL
7 TIME SLICING OF THE RS-485 SERIAL
CHANNEL
Section 2
SUPERVISOR II
SEQUENCING 9 Modes of Sequencing
9 Remote Control Mode or Digital Inputs For Remote
Sequencing
10 Description of Typical Compressor System in Sullair
Sequencing Mode
10 MACHINE PREPARATION PRIOR TO
SEQUENCING
10 SYSTEM OPERATION
11 System Setup and Tuning
12 Changing Sequence Parameters
13 SYSTEM DISPLAY
14 REMOVING A MACHINE FROM SEQUENCE
FOR MAINTENANCE
14 CALIBRATION OF P2 PRESSURE
TRANSDUCERS
14 NETWORK WIRING
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL

Sullair SUPERVISOR II Series Specifications

General

Brand	Sullair
Model	SUPERVISOR II Series
Category	Controller
Language	English