Sullair 10B 25HP - Page 35

Section 6
MAINTENANCE
29
Figure 6 ---10 Flexible Coupling
TABLE 1 INSERTION DEPTH
Pipe “D” “D”
Size Min. Max.
1!@2” 1.16” 1.62”
(38.1mm) (29.5mm) (41.2mm)
TABLE 2 ASSEMBLY TORQUE
Size Standard
1!@2” 90 to 110 in. ---lbs.
(38.1mm) (10.14 to 12.4Nm)
(I) Tighten as shown in chart or a minimum of !@16” (1.5mm) clearance between coupling lugs,
whichever comes first.
TABLE 3 GASKET RING SELECTION
Size Part Number Part Number
1!@2” (Buna N) (24KT)
(38.1mm) 040517 250007---559
*
*