Sullair 1107e - Page 20

COMPRESSOR: STANDARD MODELS:
Type: Rotary Screw
Standard Operating Pressure (II): 100 psig (7 bar) 125 psig (9 bar) 150 psig (10 bar) 175 psig (12
bar)
Bearing Type: Anti-friction
Ambient Temperature (Max.) (III): 104˚F (40˚C)
Cooling: Pressurized fluid
Compressor Fluid: Sullair Sullube
Receiver Tank Capacity: 1.8 gallons (6.8 liters)
System Capacity 2.5 gallons (9.5 liters)
Control: WS Controller controller
(II) Special compressors are available for operation at higher pressures.
(Ill) Special compressors are available for operation in higher ambient temperature.
MOTOR (IV): STANDARD MODELS:
Size: 15, 20, 25HP / 11, 15, 18KW
Type: TEFC, Epact Efficiency, Three Phase, 230/460 Hz, 380-415
(400) 50 Hz
Maximum Ambient Temperature 104˚F (40˚C)
Options Available: 200V and 575V 60 Hz, 220 50 Hz CE Approved
Starter: Full Voltage Magnetic, Wye-Delta or Solid State
Options Available: VSD Optional, 460V, 575V, 400V 50 Hz
Speed - 15, 20, 25 HP: 1765 RPM (60 Hz) or 1455 RPM (50 Hz)
(IV) Multi-frequency and voltage motors are used. The compressors must be used only with the specified electrical frequency and
voltage.
NOTE
For latest sound test data, consult
Sullair Factory.
SECTION 3
16
1100e, 1500e, 1800e Operator’s Manual and Parts List
®SULLAIR®