3.4
LUBRICATION CHANGE RECOMMENDATIONS AND MAINTENANCE -
FLUID FILTER AND SEPARATOR
LUBRICANT FLUID CHANGE FLUID FILTER CHANGE SEPARATOR CHANGE
Sullube A, E G, C A, D
SRF 1/4000 B, E G, C B, D
24KT F, E G, C A, D
CP-4600-32-F B, E G, C B, D
A - 8,000 hours or once a year.
B - 4,000 hours or more frequently if conditions so require.
C - When measured pressure loss exceeds 20 psig (1.3 bar).
D - When measured pressure loss exceeds 10 psig (0.7 bar).
E - When required by fluid analysis or known contamination.
F - Does not require replacement during normal service conditions.
G - Every 2,000 hours.
SECTION 3
18
1100e, 1500e, 1800e Operator’s Manual and Parts List
®SULLAIR®
To Next Page
Loading...
