Sullair 1107e - Page 67

7.8 COMPRESSOR HOUSING/RECEIVER TANK AND PARTS (CONTINUED)
Key Description Part Number Note Quantity
1 plug, 1/2–14 NPT to m20 thread 02250054–857 1
2 bail, lifting E8E 02250054–858 1
3 nut, hex jam m20 02250055–630 1
4 cap separator element ES–8 02250057–182 1
5 plug, sight glass 1 5/16" sae 02250097–610 1
6 plug, sight glass 1–7/8" sae 02250097–611 1
7 separator, element E8E 02250106–789 (I) 1
8 housing, bell E8E 02250149–395 1
9 transducer, pressure 0–250# ratiometric 02250155–174 1
10 probe, rtd 100 ohm plat 3.5"x 6ft 02250155–175 1
11 fitting, compress adj 250028–635 1
12 O–ring, viton 1 7/16 x 3/32" 826502–127 1
13 O–ring, viton 3 1/8 x 1/8" 826502–235 1
14 screw, socket ISO 4762 m16 x 100mm 829316–100 16
15 valve, pressure relief 200 psig – (II) 1
(I) For maintenance on separator element No. 02250106–789, order replacement element P/N 02250106–789.
(II) This part may vary per machine specification. Consult the Sullair factory for details.
PARTS LISTS
®SULLAIR®
1100e, 1500e, 1800e Operator’s Manual and Parts List
63