7.11 CONTROL SYSTEM AND ELECTRIC PARTS (CONTINUED)
Key Description Part Number Note Quantity
A1 Optional Differential Pressure Switch 1
A2 Optional Inlet Pressure Switch 1
A3 Mount To Fan Motor Support 1
A4 To Air Filter 1
A5 To Frame 1
A6 When Both Options Are Used, An Additional Hole Is Required Where
Shown
1
A7 P.C. Port 1
(I) For maintenance on rtd probe No. 02250155–175, order replacement probe P/N 02250155–175.
(II) This part may vary per machine specification. Consult the Sullair factory for details.
(III) Plug unused holes in starter with hole plug part number 409918–002.
(IV) 250014–827 (Item 22) is supplied by customer request only. 02250145–195 (Item 10) is not supplied if 250014–827 is
requested.
A:P1 – Wet receiver tank Pressure
B:P2 – Line Pressure
C: Solenoid 1
D: Solenoid 4
E: Solenoid 5
F:T1 – Wet Discharge Temperature
PARTS LISTS
®SULLAIR®
1100e, 1500e, 1800e Operator’s Manual and Parts List
71
To Next Page
Loading...
