Section 7
ILLUSTRATIONS AND PARTS
47
7.3B ENGINE, COMPRESSOR AND PARTS - JOHN DEERE MODELS 125, 130, 185 & 49HP
key part
number description number quantity
1 spacer, brake lever 250p 02250064-594 2
2 adapter, sae #4 to 10 series 02250071-119 1
3 elbow, 90 3/8”tube x 1/8”npt m 02250099-622 1
4 washer, snubbing vibration mount 02250125-471 6
5 mount, vibration isolator 185 02250125-472 4
6 switch,engine hi-temp, 225f nc 02250138-107 1
7 tee, male branch 3/8”tube x 1/8”npt 02250138-698 1
8 coupling, assembly ktr w/hub 185q 60hp 02250139-986 1
9 valve, check 1/8 female - male 02250142-248 1
10 support, engine front rh 185jd 60hp 02250143-547 1
11 support, engine front lh 185jd 60hp 02250143-548 1
12 fan, 18” blower cw rot 185jd 02250147-741 1
13 rod, speed ctl 185dpq jd 02250148-086 1
14 cylinder, speed air 1-1/16 bore 1’ stk 02250148-089 1
15 support, low rpm stop 185 jd 02250148-091 1
16 spring, extension spd ctl 185 jd 02250148-166 1
17 valve, eng oil drain m22x1.5 02250148-791 1
18 spacer, fan 3.50lg 2.5bc 185h jd 02250148-826 1
19 clip, spring spd ctl 185-260 02250152-418 1
20 support, spd ctl 185-260 jd 02250152-439 1
21 rod end, spherical rh 5/16 040136 1
22 clamp, hose 13/16” to 1-1/2” 040513 1
23 joint, ball female 1/4” l.h. 250011-578 1
24 clamp, hose 5/8” i.d. 408300-005 3
25 clamp, hose 1 13/16” i.d. 408300-009 1
26 key, square cl2 3/8” x 1 1/2 821206-150 1
27 nut, jam rh unfin 5/16-24 824605-195 1
28 nut, hex pltd 1/4-20 825204-226 1
29 nut, hex locking 1/4-20 825504-145 2
30 nut, hex locking 1/2-13 825508-262 2
31 capscrew, hex 8.8 m8 x 20mm 828008-020 3
32 capscrew, hex 8.8 m8 x 120mm 828008-120 4
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
Continued on page 49
To Next Page
Loading...
