Section 7
ILLUSTRATIONS AND PARTS
73
7.7B DISCHARGE SYSTEM AND PARTS - JOHN DEERE MODEL 160H (CONTINUED)
key part
number description number quantity
33 clamp, hose 13/16” to 1-1/2” 040513 1
34 strainer, v-type 300psix1/4 (II) 241771 1
35 valve, pressure relief 200 psig 250006-938 1
36 connector,1/4”tube x 1/4”npt 250018-428 1
37 elbow, 90 1/4”tube x 1/8”npt - 250018-429 1
38 valve, ball 3/4” service 250019-865 2
39 element, sep-fin 10 25/30 (III) 250034-143 1
40 connector, fem 1/4t x 1/4 npt 250041-084 1
41 connector, tube-m 1/4 x 1/4 810204-025 1
42 nut, hex locking 3/8-16 825506-198 2
43 capscrew, hex gr5 3/8-16 x 1 1/4 829106-125 2
44 screw, hex ser washer 1/4-20 x 3/4 829704-075 2
45 washer, pl-b reg pltd 1/4 838204-071 2
46 washer, pl-b reg pltd 3/8 838206-071 4
47 hose, heater 3/4 842115-075 1 ft.
48 elbow, 37fl 45m 1 x 1 860016-100 1
49 connector,37 fl/mpt pltd 1 x 1 860116-100 1
50 elbow, pipe 90 deg plt 1/2” 866215-020 1
51 elbow, pipe 90 deg plt 1 1/2” 866215-060 1
52 nipple, pipe-xs plt 1/2 x cl 866408-000 1
53 nipple, pipe-xs plt 3/4 x cl 866412-000 2
54 nipple, pipe-xs plt 1 x cl 866416-000 1
55 nipple, pipe-xs plt 1 x 2 866416-020 2
56 nipple, pipe-xs plt 1 x 5 866416-050 1
57 nipple, pipe-xs plt 1 1/2 x cl 866424-000 1
58 elbow, pipe 90 deg 300# plt 1” 867030-040 2
59 tee, reducing pltd 1 x 3/4 x 3/4 868604-033 1
60 reducer, str thrd viton 1 1/2 x 1 1/4 870024-020 1
61 connector, straight x jic 1 1/16 x 1 1/16 870112-012 1
62 connector, 90d str x jic 1 5/8 x 1 5/8 870620-020 2
63 tee, straight thd m-rn viton 1 1/16” 871800-106 1
64 adapter, pipe male 7/16 orng x 1/8 877202-012 1
(II) For maintenance on v-type strainer no. 241771, order repair kit no. 241772.
(III) For maintenance on air/fluid separator no. 250034-143, order replacement element kit no. 250034-
112.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR