Sullair 3710 - Page 113

8.17 PNEUMATIC CONTROL SYSTEM, WITH STANDARD SEQUENCING
(CONTINUED)
Key Description Part Number Note Quantity
1 locknut, n4 conduit sealing 02250071-362 2
2 valve, 1/2 bldwn 1.8:1 250 psig 02250100-042 (I) 1
3 valve, check 1/4" poppet style 02250115-272 1
4 valve, solenoid 3wno 1/4 250# 24vdc 02250155-714 (II) 2
5 tbg, nylon 1/4"-od red 02250155-961 3
6 tbg, nylon 1/4"-od blue 02250155-962 2
7 tbg, nylon 1/4"-od yellow 02250155-963 5
8 orifice,.140".25 fnpt x .25 02250161-433 1
9 strainer, v-type 300psix1/4 241771 (III) 1
10 hose, med press 0.50 x 015" 249608-019 1
11 valve, pressure regulator 250017-280 (IV) 1
12 elbow, 1/4" tube x 1/4" npt 250018-430 2
13 tee, male branch swiv 1/4 tube x 1/4 npt 250025-835 1
14 elbow, 90deg m swvl 1/4t x 1/8npt 250025-849 (V) 1
15 elbow, 90deg m swvl 1/4t x 1/4 npt 250025-850 8
16 connector, male1/4tube x 1/4 250025-859 1
17 connector, fem tube 1/4 x 1/4 nptf 250025-923 1
18 valve, shuttle 1/4" npt (dbl chk) 408893 1
19 adapter, fem pipe 1/4 x 7/16-20 811502-025 (V) 1
20 nipple, chase cond 1/2 847815-050 2
21 elbow, 37fl 90m 1/2 x 1/2 860208-050 1
22 elbow, pipe-90m 1/2 x 1/2 860508-050 1
23 tee, male pipe brass 1/4 869825-025 2
24 connector,37 fl 1/2 x 1/4" npt 873704-075 1
25 nipple, pipe-hx brass 1/4 x 1/4 881304-025 2
A1 Port 1
A2 Port 2
A3 Port 3
A4 To Starter Box
A5 To Inlet Valve
A6 To Inlet Adapter
A7 To Reciever Tank
A8 To Starter Below Inlet
A9 Flow Direction
(I) For maintenance on blowdown valve no. 02250100-042, order: repair kit no. 02250100-042.
(II) For maintenance on solenoid valve no. 02250155-714, order: repair kit no. 02250155-500, and replacement coil no.
02250157-502.
(III) For maintenance on strainer no. 241771, order: repair kit no. 241772.
(IV) For maintenance on pressure regulator valve no. 250017-280, order: repair kit no. 250019-453.
(V) Use with 3000 machine only.
PARTS LISTS
®SULLAIR®
3000-4500 Operator’s Manual and Parts List
107