Section 7
ILLUSTRATIONS AND PARTS
85
7.14A DISCHARGE SYSTEM - 900XH AND 1150XH
key part
number description number quantity
1 hose, medium pressure .25 x 104” lg 02250054-259 1
2 angle, discharge pipe support 3” 02250056-338 1
3 tee, 37fl swivel f-m-m 02250073-323 1
4 sub assembly, vlv assy 2.5 npt x 2.5 4bsf disch (I) 02250081-044 1
5 hose, disch 2.5” st stl 900xh 02250092-744 1
6 flange, kit sae splt 2.5” - viton 02250099-416 1
7 switch, temp-265f 54” los nc 045641 1
8 gasket, 2-1/2” flange 046053 1
9 mount, vibration (50 durometer) 047628 1
10 mount, vibration isolator 185q 047630 1
11 flange, thrd 2 1/2” 300# rf 820330-040 1
12 nut, hex pltd 3/8-16 825106-337 1
13 nut, hex locking 3/8-16 825506-198 1
14 nut, hex locking 5/8-11 825510-329 1
15 capscrew, hex gr8 3/4-10 x 2 1/4 827912-225 1
16 capscrew, hex gr5 5/8-11 x 3 1/2 829110-350 1
17 washer, spr lock reg pltd 3/8 837806-094 1
18 washer, spr lock reg pltd 5/8 837810-156 1
19 washer, spr lock reg pltd 3/4 837812-188 1
20 washer, pl-b reg pltd 3/8 838206-071 1
21 washer, pl-b reg pltd 5/8 838210-112 2
22 washer, pl-b wide pltd 3/8 838306-112 1
23 elbow, 37fl 90m 1/4 x 1/4 860204-025 1
24 elbow, 37fl 90m 5/16 x 1/8 860205-012 2
25 nipple, pipe-xs plt 2 1/2 x 5 866440-050 1
26 u-bolt, 3/8” x 2” pipe pltd 868306-200 2
27 sa, receiver & parts (II) 02250127-668 1
A1 Refer to Section 7.17 Sub-assembly - High Pressure Filter / Check Valve / Orifice for
additional information.
(I) For maintenance on assembly valve sub-assembly no. 02250081-044, order repair kit no. 606208-001,
and replacement gasket no. 046053 (see key number 8 of this Section). For additional information,
consult Section 7.18, Discharge / Check Valve Assembly.
(II) For additional information pertaining to receiver and parts sub-assembly no. 02250127-668, refer to
Section 7.15A Receiver and Parts - 900XH & 1150XH Standard and Aftercooled.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
