Section 7
ILLUSTRATIONS AND PARTS
101
7.15B RECEIVER AND PARTS- 1350XH STANDARD AND AFTERCOOLED
key part
number description number quantity
1 washer, spr lock reg pltd 1/2 837808-125 4
2 capscr, ferry hd pltd 1/2-13 x 2 1/2 867308-250 4
3 cap, nut .50 x 370 flare 02250044-227 1
4 elbow, 900 5/16” tube x 1/4”npt 02250081-218 1
5 plug, sight glass 1-7/8” sae 02250097-611 1
6 flg, kit sae splt 2” -vi ton 02250099-415 1
7 gskt, sep cover h i press (I) 02250116-862 1
8 plate, rece iver 425xh & 900xh 02250121-613 1
9 adpt, 2” tube assy w/4-bolt flg (II) 02250131-977 2
10 hose, mp 0.50 x 1-1/16 sae x 38” lg 02250135-495 1
11 sa, bdv 900/500 tier ii 02250135-530 1
12 nipple, pipe-xs plt 2 x 6 866432-060 0
13 pipe, asy 2” 900xh open frame 02250142-801 1
14 vlv, thrm 210 deg 2” sae 4bsf (III) 02250142-938 1
15 sa, hi press flr/check/orifice (IV) 02250145-168 1
16 vlv, rlf 1 x1 1/2 440 psig 02250147-981 1
17 rec, air/oil vrtcl 600psig 1350 02250148-251 1
18 sep, air/oil 1350/175/350 spcl (V) 02250148-253 1
19 indicator, delta-p 10lb 110-185dpo 42148 1
20 switch, temp-265f 54” los nc 45641 1
21 nut, d-loc 3/4-10 46255 1
22 hose, med press. 25 x 30” lg 249604-019 1
23 tube, stainless steel 5/16 x 6.25 lg 250029-235 1
(I) This gasket is included in kit no. 02250148-260 for separator element (refer to key no. 18 of this
Section).
(II) Use for air-cooled machine.
(III) For maintenance on thermal valve no. 02250142-938, order repair kit no. 02250142-940. NOTE:
When performing maintenance on thermal valve, order replacement viton o-ring no. 826502-228,
which seals between the thermal valve and the receiver tank (refer to key no. 29 of this Section).
(IV) For complete breakdown of high pressure filter / check valve / orifice sub-assembly, refer to Section
7.17 Sub-assembly - High Pressure Filter / Check Valve / Orifice.
(V) For maintenance on air/fluid separator no. 02250148-253, order maintenance kit no. 02250148-260.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
Continued on page 103
To Next Page
Loading...
