Sullair DHL-150 - Cycle Time Set

DHL Regenerative Dryer w/SHDC-2300 touch screen controller User Manual US-EN
1000-4544 R01
24
Subject to EAR. ECCN EAR99 and related export control restrictions.
5.6 CYCLE TIME SET
(Figure 5.6) Cycle time set screen
● Pressing the Cycle Time Set button will access a screen that allows the operator to select
one of three NEMA time cycles. The standard cycle is a 10-minute cycle for a -40-dew
point.
PLEASE NOTE: The cycle time should NEVER be changed without consulting the factory. The
NEMA cycle will affect the dew point and must include other dryer operational settings.
● Pressing the Menu button will take the controller back to the Menu screen.
STANDARD CYLCE
FOR -40 DEW POINT