(Figure 5.4A)
As previously stated, once the correct login and password is entered the SERVICE MAIN
SCREEN will appear, (Fig 5.4A).
● The Energy Savings button is highlighted showing that it can be changed (indicated by A).
Please Note: If the dew point option is not optioned on your dryer, this button will not be
operational as it will have no function, therefore the Dew Point Sensor Readout icon will not
appear.
● The message displayed on the Energy Savings button indicates the current state that the
function is operating in. (Fig 5A)
● For example, "Energy Savings ON" indicates the controller is operating in DCC
mode. When the button displays "Energy Savings OFF" the DCC mode is off.
● The dew point will
continue to be displayed in
both modes of DCC operation.
The reading will also be
displayed on the Home screen
regardless of Energy Savings
Mode.
(Figure 5.4B)
To Next Page
Loading...
