Sullair DHL-80 - SECTION 1-INTRODUCTION; SECTION 2-SAFETY; SECTION 3-INSTALLATION; SECTION 4-STARTUP

TABLE OF CONTENTS
SECTION 1—INTRODUCTION
5 1.1 IDENTIFICATION PLATE
5 1.2 WARRANTY CONDITIONS
SECTION 2—SAFETY
7 2.1 SAFETY INFORMATION
8 2.2 DEFINITION OF THE SAFETY SYMBOLS USED
10 2.3 WARNINGS
10 2.4 PROPER USE OF THE DRYER
11 2.5 INSTRUCTIONS FOR THE USE OF PRESSURE EQUIPMENT
SECTION 3—INSTALLATION
13 3.1 TRANSPORT
13 3.2 INSTALLATION SITE
14 3.3 INSTALLATION LAYOUT
15 3.4 OPERATING CONDITIONS
15 3.5 CONNECTION TO THE COMPRESSED AIR SYSTEM
15 3.6 CONNECTION TO THE ELECTRICAL SUPPLY
15 3.7 INLET FILTER CONDENSATE DRAIN
SECTION 4—STARTUP
17 4.1 PRELIMINARY OPERATION
17 4.2 FIRST START-UP
18 4.3 OPERATION AND SWITCHING OFF
SECTION 5—TECHNICAL SPECIFICATIONS
SECTION 6—TECHNICAL DESCRIPTION
21 6.1 CONTROL PANEL
21 6.2 DESCRIPTION OF OPERATION
23 6.3 OPERATION
23 6.4 PURGE METERING VALVE SETTINGS