TABLE OF CONTENTS
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
Section 1
PAGE
SAFETY
1
1.1 GENERAL
1
1.2 PERSONAL PROTECTIVE EQUIPMENT
1
1.3 PRESSURE RELEASE
1
1.4 FIRE AND EXPLOSION
2
1.5 MOVING PARTS
2
1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
2
1.7 TOXIC AND IRRITATING SUBSTANCES
3
1.8 ELECTRICAL SHOCK
3
1.9 LIFTING
4
1.10 ENTRAPMENT
Section 2
DESCRIPTION
5
2.1 INTRODUCTION
5
2.2 DESCRIPTION OF COMPONENTS
5
2.3 ENCAPSULATED COMPRESSOR SYSTEM,
FUNCTIONAL DESCRIPTION
5
2.4 COMPRESSOR COOLING SYSTEM,
FUNCTIONAL DESCRIPTION
5
2.5 AIR INLET SYSTEM, FUNCTIONAL DESCRIPTION
7
2.6 CONTROL SYSTEM, FUNCTIONAL DESCRI PTION
8
2.7 INSTRUMENTATION, FUNCTIONAL DESCRIPTION
Section 3
SPECIFICATIONS
9
3.1 SPECIFICATIONS-- E S--6
10
3.2 COMPRESSOR LUBRICATION GUIDE
10
3.3 LUBRICATION GUIDE--- 24KT COMPRESSORS
10
3.4 LUBRICATION GUIDE--- OPTIONAL FLUID
Section 4
INSTALLATION
13
4.1 LOCATION OF COMPRESSOR
13
4.2 VENTILATION AND COOLING
13
4.3 SERVICE AIR PIPING
13
4.4 FLUID LEVEL CHECK AND CHANGE PROCEDURE
14
4.5 MOTOR ROTATION DIRECTION CHECK
14
4.6 ELECTRICAL PREPARATION
To Next Page
Loading...
