EasyManua.ls Logo

Sullair LS-160 series User Manual

Sullair LS-160 series
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INDUSTRIAL AIR
COMPRESSOR
LS-1120 &&
LS-1160
40, 50, 60, 75 & 100HP/
37, 45, 56 & 75KW
AIR-COOLED & WATER-COOLED
STD & 24KT
OPERATOR’S
MANUAL AND
PARTS LIST
KEEP FOR
FUTURE
REFERENCE
Part Number 02250143-898
©Sullair Corporation

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sullair LS-160 series and is the answer not in the manual?

Sullair LS-160 series Specifications

General IconGeneral
BrandSullair
ModelLS-160 series
CategoryAir Compressor
LanguageEnglish

Summary

Section 1 SAFETY

General Safety Precautions

General safety precautions and operational responsibilities.

Personal Protective Equipment

Requirements and compliance for personal protective equipment.

Pressure Release Safety

Safety measures for pressure release and hose management.

Fire and Explosion Hazards

Precautions to prevent fire and explosion risks.

Moving Parts Safety

Guidelines to avoid injury from moving components.

Hot Surfaces and Sharp Edges

Avoiding contact with hot surfaces and sharp edges.

Toxic and Irritating Substances

Handling toxic substances and air quality for respiration.

Electrical Safety Precautions

Safety measures to prevent electrical shock hazards.

Safe Lifting Procedures

Procedures for safely lifting and moving the compressor unit.

Entrapment Hazards

Preventing entrapment risks within the compressor enclosure.

Section 2 DESCRIPTION

Standard Electro-Mechanical Control System

Functional description of the standard electro-mechanical control system.

Supervisor Controller System

Functional description of the Supervisor Controller system.

Section 3 SPECIFICATIONS

Technical Specifications Table

Table of key technical specifications for LS-120 and LS-160 series.

Lubricant and Fluid Recommendations

Guidelines for lubricant selection and fluid fill procedures.

Section 4 INSTALLATION

Compressor Mounting Requirements

Foundation and mounting requirements for compressor installation.

Ventilation and Cooling Setup

Ensuring adequate ventilation and cooling for stable operation.

Motor Rotation Check (Standard)

Procedure to check motor rotation direction for standard models.

Motor Rotation Check (Supervisor)

Procedure to check motor rotation direction for Supervisor Controller.

Section 5 OPERATION- ELECTRO-MECHANICAL

Initial Start-Up Procedure

Step-by-step guide for the initial start-up of the compressor.

Section 7 MAINTENANCE

Control System Adjustment

Instructions for adjusting the pressure switch and regulator settings.

Section 8 TROUBLESHOOTING- ELECTRO-MECHANICAL

Standard Electro-Mechanical Troubleshooting Guide

Guide to identifying and resolving common compressor problems.

Related product manuals