Section 9
ILLUSTRATIONS AND PARTS LIST
63
9.11 COMPRESSOR DISCHARGE SYSTEM (AIR--COOLED)
key part
number description number quantity
1 tank, air fluid sep 14” 02250054--125 1
2 hose, corrugated st stl 3” 02250059--184 1
3 flange, threaded 2 1/2” 819315--040 1
4 tube, 2” mpv to cooler 02250053--700 1
5 silencer, air 1/2” 041006 1
6 valve, blowdown 2--way pneu
(I)
250030--276 1
7 orifice, 1/2”m x 1/2”f .156 234125--156 1
8 tube, air clr/sep 2” 02250053--698 1
9 elbow, tube 2” x 2” 90
_
810532--200 3
10 support, sep./trap combination 02250053--355 1
11 sep/trap, combination
(II)
410143 1
12 support, brk cust. conn. 02250054--613 1
13 tube, sep/trap 2” to cust. conn. 02250053--869 1
14 probe, rtd 100ohm 250039--909 2
15 tubing, stl steel 1/4” 841215--004 15 ft.
16 valve, 2” npt min press check 242405 1
17 u--bolt 6” 829008--600 1
18 separator, air/fluid prim
(III)
02250060--462 1
19 o--ring, viton 3/4” x 1/8” 826502--240 1
20 gasket, asa 2 1/2” 150# 240621--7 1
21 separator, air/flulid second
(III)
02250060--463 1
22 valve, relief 500 cfm 02250055--464 1
23 valve, ball 3/8” 047116 1
24 tubing, thermoplastic 3/8” 0d 250024--746 4
25 cross, pipe 150# 2” 801315--080 1
26 nipple, pipe 2” x 2 1/2” sc 40 822132--025 1
27 plug, pipe 1/2” steel 807800--020 1
28 bushing, red 2” x 1/2” 150# 802108--020 1
29 connector, tube m 2” x 2” 810232--200 3
30 capscr, hex gr5 5/8”--11 x 2 3/4” 828610--275 4
31 plug, pipe 1/4” steel 807800--010 1
(Continued on page 65)
(I)
For maintenance on blowdown valve no. 250030--276, order repair kit no. 02250045--132.
(II)
For maintenance on separator/trap no. 410143, order repair kit no. 250033--038.
(III)
For separator maintenance, order replacement element kits no. 02250061--137 (primary), and no.
02250061--138 (secondary).
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
