SN55, SN55S, SN55V, SN75, SN75S, SN75V User Manual 3: Specifications
02250247-571 R04
Subject to EAR, ECCN EAR99 and related export control restrictions. 34
3.9 Identification, water-cooled
Drawing notes
1 ALLOW 1.25 METERS [4.00 FEET] MINIMUM CLEARANCE AROUND MACHINE FOR ACCESS AND FREE CIRCULATION OF AIR.
2
A FOUNDATION OR MOUNTING CAPABLE OF SUPPORTING THE WEIGHT OF PACKAGE, AND RIGID ENOUGH TO MAINTAIN THE COMPRESSOR
FRAME LEVEL IS REQUIRED. THE COMPRESSOR FRAME MUST BE LEVELLED AND SECURED BETWEEN THE FRAME AND THE FOUNDATION.
NO PIPING LOADS ARE PERMITTED AT EXTERNAL CONNECTIONS.
3 ALL DIMENSIONS ARE ± 12.7MM [.50”].
4 RECOMMENDED INCOMING CUSTOMER POWER SUPPLY IS SHOWN ON DRAWING.
5 ALL DIMENSIONS SHOWN IN MILLIMETERS WITH INCHES DIMENSIONS IN PARENTHESES.
To Next Page
Loading...
