SN55, SN55S, SN55V, SN75, SN75S, SN75V User Manual 3: Specifications
02250247-571 R04
Subject to EAR, ECCN EAR99 and related export control restrictions. 44
3.14 Piping & instrumentation, air-cooled—SN55V, SN75V
Key Description Qty
1FILTER, AIR 1
2 INDICATOR, RESTRICTION 1
3 VALVE, INLET 1
4 COMPRESSOR 1
5MOTOR 1
6 FILTER, OIL 1
7COOLER, AIR 1
8 COOLER, OIL 1
9ORIFICE 3
10 SIGHTGLASS 1
11 STRAINER 2
12 PLUG, SIGHT GLASS 1
13 PROBE, THERMISTER 1
14 VALVE, RELIEF 1
15 TRANSDUCER, PRESSURE 2
16 VALVE, MINIMUM PRESSURE 1
17 VALVE, BLOWDOWN 1
18 SEPARATOR, WATER 1
19 ELEMENT, SEPARATOR 1
20 VALVE, DRAIN 1
21 VALVE, SOLINOID 3WNO 1
22 TANK, SEPARATOR 1
23 FILTER, PNEUMATIC 1
24 VALVE, CHECK 2
25 VALVE, BALL/STRAINER COMBO 1
26 DRAIN, ZERO LOSS 1
27 VALVE, THERMAL 1
Drawing notes
1
CONTROL/MOISTURE DRAIN LINES ARE 1/4" TUBING EXCEPT AS
NOTED.
2
OPTIONAL HEAT TRACE IS APPLIED ONLY TO CONTROL AND
MOISTURE DRAIN LINES AND USED ONLY WITH STAINLESS
STEEL TUBING. REFER TO FACE OF ORDER FOR HEAT TRACE
REQUIREMENTS.
Component Description
P1 WET SUMP PRESSURE
P2 LINE PRESSURE
SOL1 LOAD/UNLOAD SOLENOID VALVE
SOL5 COMBO DRAIN/ZL DRAIN SOLENOID VALVE
T1 WET DISCHARGE TEMPERATURE
Tubing color Purpose
BLUE TANK PRESSURE
YELLOW REGULATOR PRESSURE
RED UNLOAD PRESS
CLEAR MOISTURE DRAIN
Key Description Qty
To Next Page
Loading...
