Sullivan-Palatek 30D7 - Compressor Lubricant

48 MAINTENANCE
6.5 COMPRESSOR LUBRICANT
Refer to Chapter 8.4 Compressor Lubricants on page 62 
by Sullivan-Palatek
CAUTION! Never mix synthetic lubricants with hydrocarbon lubricants. Never mix synthetic lubricants

Lubricant manufacturers include a variety of additives in the blending process to enhance lubrication,


Environmental conditions in the area of compressor operation such as the presence of reactive gases or

synthetic lubricants may extend the normally recommended drain and replace period; however, the user is
encouraged to closely monitor the lubricant condition and to participate in an oil analysis program with the

6.5.1 CHECK
The oil level should be checked daily, when the compressor is o.
1. 
2. 
3. 
4. While the compressor is running, the oil should be visible in the sight glass and the compressor not

6.5.2 FILL

1. Follow 6.3 Stopping for Maintenance
2. 
3. 
4. 
5. 
6. 
6.5.3 CHANGE
Change the compressor oil as indicated by 6.1 Maintenance Schedule
REMOVE OLD LUBRICANT
1. Follow 6.3 Stopping for Maintenance
2. 
3. 
4. 
ADD NEW LUBRICANT
1. 
2. 
3. 
4. 
6.5.4 CONVERT


REMOVE OLD LUBRICANT
1. Follow 6.3 Stopping for Maintenance
2. 
3. 