Sumitomo Drive Technologies HYPONIC DRIVE - Page 24

23
Table 7 15–90W Single-phase motor Capacitor Specification
Motor
voltage
Motor
voltage
Motor
capacity
(W)
For starting
Capacitor
capacity( F)
Capacitor voltage
resistance (V)
For operation
Capacitor
capacity( F)
Capacitor voltage
resistance (V)
23010125600.1
230301251000.2
230401252000.4
100V/200V
Capacitor
voltage
ressistance
Motor
type
Motor
capacity
(W)
Frame
size
Capacitor
capacity
( F)
100V 220V
200V 440V
Induction
Reversible
Induction
Reversible
15 01#, 03# 5
7
12
14
18
25
6
10
14
3.5
4.5
6.5
4
5.5
8
01#, 03#
05#, 07#
17#, 1240#
17#, 1240#
15#, 17#, 1240#
01#, 03#
01#, 03#
05#, 07#
17#, 1240#
17#, 1240#
15#, 17#, 1240#
17#, 1240#
17#, 1240#
15#, 17#, 1240#
25
40
40
60
90
15
25
40
40
60
90
40
60
90
16
22
32
17#, 1240#
17#, 1240#
15#, 17#, 1240#
40
60
90
Table 8 0.1-0.4kW Capacitor start and run type Single phase motor Capacitor Specification
COMMON
6–3) Protection Coordination
(1) Use a molded case circuit breaker for protection against short circuit.
(2) Use an overload protection device that protects the unit against asurge of electric current
exceeding that shown on the rating plate.
(3) For an
explosion-proof type motor , use an overload protector that can protect the unit
within the allowable binding hour by means of the locked rotor current shown on the
rating plate.
6–4) Single-phase motor, Single-phase reversible motor Capacitor
Specification
6. Wiring