34
12 Warranty
12 Warranty
◆ Warranty policy on inverter
Warranty period The warranty period is 18 months from date of shipment or 12 months after initial opera-tion, whichever comes first.
Warranty condition
In the event that any problem or damage to the Product arises during the "Warranty Pe-riod" from defects in the Product whenever the Product
is properly installed and combined with the Buyer's equipment or machines maintained as specified in the maintenance ma-nual, and properly
operated under the conditions described in the catalog or as otherwise agreed upon in writing between the Seller and Buyer or its customers;
the Seller will pro-vide, at its sole discretion, appropriate repair or replacement of the Product without charge at a designated facility, except as
stipulated in the "Warranty Exclusions" as described below.
However, if the Product is installed or integrated into the Buyer's equipment or machines, the Seller shall not reimburse the cost of: removal or re-
installation of the Product or other incidental costs related thereto, any lost opportunity, any profit loss or other incidental or consequential losses or
damages incurred by the Buyer or its customers.
Warranty exclusion
Not withstanding the above warranty, the warranty as set forth herein shall not apply to any problem or damage to the Product that is caused
by:
1. Installation, connection, combination or integration of the Product in or to the other equipment or machine that rendered by any person or
entity other than the Seller.
2. Insufficient maintenance or improper operation by the Buyer or its customers such that the Product is not maintained in accordance with the
maintenance manual provided or designated by the Seller;
3. Improper use or operation of the Product by the Buyer or its customers that is not in-formed to the Seller, including, without limitation, the
Buyer's or its customers' opera-tion of the Product not in conformity with the specifications;
4. Any problem or damage on any equipment or machine to which the Product is in-stalled, connected or combined or any specifications particular to
the buyer or its cus-tomers;
5. Any changes, modifications, improvements or alterations to the Product or those func-tions that are rendered on the Product by any person
or entity other than the Seller;
6. Any parts in the Product that are supplied or designated by the Buyer or its customers;
7. Earthquake, fire, flood, salt air, gas, lightning, acts of God or any other reasons be-yond the control of the Seller;
8. Normal wear and tear, or deterioration of the Product's parts, such as the cooling fan bearings;
9. Any other troubles, problems or damage to the Product that are not attributable to the Seller.
Others
The Seller will not be responsibility for the installation and removal of the inverter. Any in-verter transportation cost shall be born by both
Seller and Buyer.
To Next Page
Loading...
