4 CC-Link Option Components
9
4 CC-Link Option Components
◆ CC-Link Option
Figure 2
Figure 2 Option Unit
Note: For details on the LEDs, Refer to CC-Link Option LED Display on page 10 and Fault LED Display on CC-Link Option Side on page 24.
◆ Dimensions
The installed CC-Link Option adds 27 mm to the total depth of the drive.
Figure 3
Figure 3 Dimensions
◆ Terminal Block
Table 2 Terminal Descriptions
Figure 4
Figure 4 CC-Link Option Terminal Block
A – LED (SD) H – Nameplate
B – LED (RD) I – Function Earth cable connection (FE)
C – Option cover J – Mounting clip
<1> Cables are not connected to the CC-Link Option and are packaged separately in the box.
D – LED (L.ERR) K – Ground Cable
<1>
E – LED (L.RUN) L – Through-hole for cable
F – CC-Link PCB M – Terminal block
G – Attachment screw hole for option cover N – Option connector
Terminal Name Description
1DA
Comm. Data +
2DB
Comm. Data –
3DG
Signal Ground
4SLD
Shield
5SLD
Shield
L.RUN
L.ERR
SD
RD
E
DB
C
CC-Link with cover attached
FE
N
J
G
F
J
K
I
LM
H
CC-Link with cover removed
underside
27 mm
Front View
(looking from the front of the CC-Link Option)
DA DB DG
SLD SLD
Bottom View
To Next Page
Loading...
